Skip to content Skip to footer
One Day Refinish

Screen and Recoat Hardwood Floors - No Sanding Needed

Homeowners and businesses across Morris, Sussex, Warren, and Essex County choose a screen and recoat when floors look dull or lightly worn but don’t need full sanding.

We remove surface scratches and apply a fresh protective finish to restore clarity and extend the life of the floor.

Owner of true tone screening hardwood floors for screen and recoat hardwood floors service
Satisfaction Guarantee

We stand behind every project we complete

One Day Refinish

In and out with minimal disruption to your home or business

Locally Owned

Owner-operated based out of Morris County

Protective Top Coat

A durable finish that extends your floor's life

our process

How We Refresh Your Floors

01
Floors are carefully cleaned and prepared to remove dirt, oils, and contaminants so the new finish bonds properly.
Free Estimate
02
A professional screening machine lightly abrades the existing finish to remove minor scratches and create a smooth surface for recoating.
Free Estimate
03
A fresh coat of durable finish is applied to restore shine, protect the wood, and extend the life of your floors.
Free Estimate
BeforeBeforeAfter
before & after

See the Difference a Screen and Recoat Makes

Real results from real homes. Our screen and recoat hardwood floor process removes surface wear, restores clarity, and brings hardwood floors back to life without the need for full sanding.

These before and after examples show how proper maintenance can dramatically improve appearance while extending the life of your floors.

What Is a Screen and Recoat?

A screen and recoat, sometimes called a buff and coat, is a way to refinish hardwood floors without sanding to bare wood. We lightly abrade the existing finish with a fine sanding screen to remove surface scratches and give the new coat something to grip. Then we apply a fresh coat of durable finish. Because we are working within the top layer of finish rather than the wood itself, there is far less dust, no stain change, and the job is typically done in a single day.

Is Your Floor a Good Candidate?

A screen and recoat works well when:

  • The floor looks dull, flat, or worn in traffic areas
  • Scratches are light and sit in the finish, not in the wood
  • The finish is still intact, with no gray or bare spots

You will likely need something else if:

  • The finish has worn through and the wood is turning gray
  • There are deep gouges, water damage, or dark pet stains
  • You want to change the stain color
  • The floor has wax or polish buildup. This must be removed first with hardwood floor wax removal, or the new coat will not bond.

If your floor only needs its shine and protection restored, a lighter clean and seal may be all it takes.

Screen and Recoat vs. Sanding and Refinishing

A full sand and refinish removes the finish and a layer of wood, then re-stains and re-coats the floor. It fixes deep damage and allows a color change, but it takes several days, creates a lot of dust, and removes wood each time it is done. A screen and recoat only renews the top layer of finish. It costs a fraction of a full refinish, is usually done in one day, and preserves the wood for the long run. Learn more in our guide: Can you refinish hardwood floors without sanding?

How Often Should You Screen and Recoat Hardwood Floors?

The best time to screen and recoat is before the finish wears through, while the floor still looks only tired. High-traffic homes with kids and pets will need it sooner than quieter homes. Staying on top of it every few years is what keeps most floors from ever needing a full sanding.

What Affects the Cost?

  • Total square footage and number of rooms
  • Stairs and areas finished by hand
  • Condition of the existing finish
  • Whether wax or polish buildup must be removed first
  • The finish and sheen you choose

We price every project after a free walkthrough, so there are no surprises. Request your free quote.

Screen and Recoat FAQs

How long does a screen and recoat take?

Most homes are completed in one day. We will walk you through drying and furniture times before we start. Our wood floor refinishing prep guide explains how to get your home ready.

Will a screen and recoat remove deep scratches?

No. It removes light scratches and wear in the finish. Scratches that go into the wood need sanding to remove.

Can you screen and recoat engineered hardwood?

Yes, as long as the existing finish is intact. Because we do not sand into the wood, it is a safe way to refresh engineered floors with a thin wear layer.

Can I change the sheen of my floors?

Yes. The new topcoat can be a different sheen than your current finish, so you can go from glossy to satin or matte, or the other way around.

Why would a floor not take a recoat?

The most common reason is wax or polish buildup from store-bought products. The new finish cannot bond to it, which is why we check for it first and handle it with wax removal when needed.

Testimonials

What our Customers are Saying

Book your Free Quote Today

Someone from our team will be in touch with within 24hrs!